Sodium Bromide

 Sodium Bromide has long been used as an algaecide in swimming pools. Typically, very small amounts of sodium bromide are added to chlorine pools that have algae. The idea is that the sodium bromide reacts with the chlorine to form chloramines. While one generally does not want chloramines in pool water--one generally shocks the water to turn chloramines back to free chlorine, chloramines are more effective at killing certain types of algae. Therefore, there are times when sodium bromine is added as a supplement to a chlorine pool to generate chloramines to fight algae.

There is a rumor that the EPA is banning Sodium Bromide. This is not true. There is, however, some controversy regarding changes to labeling and some confusion regarding tests and its proper and common use. 

The controversy arose out of a study that involved sodium bromine concentrations at sixty six times the recommended dose. This study revealed some dangers to health.  

Scott Hamilton, CEO of United Chemical has issued a very thorough statement about this. His company will continue to sell sodium bromine, but some labeling may change and some distributers are choosing not to sell it.   

Error codes and replacing parts

Customer: "My heater is displaying an EO5 error code. Can you tell me what the problem is and how much it will cost to repair?"

TPR: I can't tell you what is wrong until I come out and troubleshoot it. 

Customer: "I looked it up. It is a stack flue sensor. How much for that? 

TPR: I can tell  you the price to replace that part, but there is no guarantee that that will fix the problem.

Explanation

The above exchange happens often. Error codes do not tell what the problem is. They point in a general direction. Most "do it yourselfers" and many inexperienced pool guys assume that an error code tells you what sensor to replace. It isn't that simple. One should always start with the possibility that the sensor is doing its job--that it is working correctly--and is telling you something about the heater. 

So, with the above example, a stack flue error isn't necessarily telling you that the sensor is bad. It may be that the temperature at the exhaust (the stack flue) is excessive. If you get this error a prudent and careful tech will need to rule out this possibility before replacing the sensor. 

This is why troubleshooting matters. 

What would cause excessive exhaust temperature? 

• poor water flow through the heater could cause this
• incorrect adjustment of the gas valve
• excessive soot build up on the heat exchanger
• a blockage in the vent (more likely with indoor installations)

Now, it could be a bad sensor, but that is not the starting point. Sensors aren't put in a heater to simply be replaced. They are part of the design because they can point to underlying problems. 

Price

Customer: "You charge $200 to come out and diagnose my pool heater? This other guy only charged me $150. He came out and didn't do anything." 

I have heard this story a couple of times now. 

A customer chooses to go with the cheaper option only to find out that the cheap guy doesn't fix the problem. Indeed, he doesn't do much of anything? Why would that seem like a better value? 

Let's take a step back and see why I need to charge what I do. 

First of all, I fix things that are complicated--things that often take some time--and some work--to figure out. If the problems I fix were easy or obvious we wouldn't need professionals. 

When it comes to repairing a pool heater or a control system problem, the aspect of the job that requires the most expertise and careful work is the troubleshooting. This is especially true when there are multiple problems causing the same trouble. 

So, to reflect this, I charge for troubleshooting. Currently, I charge $200. This might seem like a lot, but consider this: it cost me more than $100 just to fill up the gas tank on my service truck--and I do show up in a fully stocked service truck that likely contains enough parts to fix most heater problems. 

What happens during the trouble shooting phase? From what my customers tell me, the $150 guy looks at it and makes a guess. If anything looks complicated, he tells you it is too old and you need to replace it. He is in and out in 5-10 minutes. He "only" charges $150, but you don't know any more than when he arrived. 

With me, I will first see if it is safe to fix--some heaters--if they are rusted out or the combustion chamber is compromised--simply aren't safe to repair. Second, I will advise your on whether or not it is prudent to repair. If the heat exchanger is so full of soot that it traps excess heat inside so that any repair I do will be short lived, I will tell you that prior to proceeding. Now, for those heaters that are in generally good condition, I will troubleshoot them. This troubleshooting often requires specialized equipment and often requires swapping in new parts. If there are multiple problems, this can take a while. If the heater is staying off due to a dirty filter, I will have to clean the filter before I can tell if there is a problem internal to the heater or not. This is what the $200 pays for. It pays for real work, not guessing. 

After that phase, I can give you a quote to repair. 

The actual repair portion is often much simpler than the troubleshooting phase. 

Think of me as a knowledge worker, not a laborer. You pay me for what I know and what I can tell you, not just my labor. 

New ruling about gas pool heaters

The South Coast Air Quality Management District (SCAQMD) issued rule1146.2  on June 7 that will eventually ban the use of natural gas fired commercial and residential water heaters, including swimming pool heaters in the four-county area that they cover. This includes Los Angeles, Orange, Riverside, and part of San Bernardino counties. 

Under the new rule, residential gas pool heaters will not be able to be installed in new construction beginning January 1, 2028. 

Existing gas pool heaters could stay in operation and be replaced until January 1, 2031. Beyond that, existing gas heaters could still be used and repaired for the remainder of their usable life, but replacement ones could not be installed. 

The rule did include a provision that if an electrical upgrade is required to install a new heat pump as a replacement for a gas pool heater (and electrical upgrade most likely will be required), then the Board's rule extends the time to comply an additional 5 years. 

The extended timeframe is intended to encourage and incentivize manufacturers to develop technology to respond to this rule. It should also incentivize builders and home owners choose more energy efficient designs such as covered pools and stand alone electric spas that are better suited for this type of electric heat.  

Efficient Pool Heating

Summary

Have Technical Pool Repair:

1. program your control system for maximum efficiency
2. upgrade your eyeball fittings to venturi return fittings, and
3. use a liquid solar blanket.

Here are the details and explanations:

Inefficient Design Features

Negative Edges

Some pools are more efficient to heat than others. Pools that have negative edges (also called infinity pools or vanishing edges) are not efficient to heat. The reason is that as the pool water flows over the negative edge it cools. Thus, if you are trying to heat a pool like this, turn off the negative edge pump when heating the pool.

Waterfalls

Waterfalls also cause heat loss. Turn them off when heating.

Pool and Spa Combos

The most common type of pool in the Inland Empire of Southern California is the pool & spa combo. Both are part of the same system and when filtering the pool, water is returned to both the pool and spa and you have a spillover from the spa to the pool. While not as wasteful as the negative edge or a large waterfall, this spillover does cause some heat loss. To maximize the retention of heat, set the valves so that you minimize the time that the spillover operates. For instance, if you have automation, you can set up the system so that when heating the pool, the valves turn to isolate the pool. To keep the spa clean, you can program a separate filtration cycle just for the spa. Finally, to prevent the spa from slowly draining, you will also need to program a very short spillover time to ensure that the spa stays full.

Return fittings in the walls

The ideal way to heat a pool is from the bottom up. A few pools have deep heat returns where the heated water is returned to the bottom of the pool. Most, however, have returns in the sides. Since warm water rises to the top (and since the water in most pools is returned via wall fittings near the top), this results in a foot or so of warm water at the top and colder water at the bottom. Since much of the water is being drawn into the filtration system from the surface via the skimmer and returned near the surface, the heater will only be measuring the temperature of the water in this top warm layer. It will therefore stop heating when this top layer has warmed up to your set point. The bottom, however, will still be cold. To counter this effect, have Technical Pool Repair replace your standard eyeball returns with venturi fittings. These direct the water downward and have slots in the top that draw the warmer surface water down into the pool. This combination mixes the water better and allows your pool heater to more accurately measure (and therefore more completely heat) the entire pool, not just the surface.

Covers

The biggest obstacle to heating a pool is heat loss. Whether you heat your pool with a gas pool heater, solar panels, or just rely on direct sunlight, 80% of whatever heat that goes in will be lost due to evaporation.

As water evaporates there is a phase change from liquid to vapor. This phase change is an endothermic reaction—meaning that heat is absorbed from the water as the water evaporates. If we can cut down on evaporation, we can stop the primary source of heat loss.

A cover is the best way to minimize evaporation and lessen heat loss.

Automatic Covers

Auto covers (vinyl covers that run on tracks and open and close via a motorized reel and pulley system) are the easiest to use. However, these covers work best on rectangular pools and very few pools in our area have them nor are they designed to accommodate one. If you were to design an efficient pool, it would have an auto cover.

Solar Covers

These are the bubble covers that float on the surface of the water. They are generally pulled off by hand onto the deck, but they can be used with a reel that makes removal a little easier. It helps to have two people when opening or closing these as they can be awkward. It is often discouraging to clean a pool with a solar cover as when you first look under the cover, the pool will be relatively clean, however, when you pull the cover off, the debris that has blown onto the cover will rinse off into the pool making it look worse than when your first looked. Second, since these covers are typically only used in the spring and fall, they often harbor algae when not in use. When first putting them on for the season, you often introduce an algae bloom into your pool.

Solar Rings

An easier to handle alternative to the solar blanket is a set of solar rings. These rings are about five feet in diameter. You add as many as needed to cover as much of your pool as practical. Since individually these are smaller than a solar cover, they are easier to remove for use or cleaning. It is, however, not recommended that these be stacked and left in the sun when off the pool, so they are still somewhat challenging to deal with.

Liquid Solar Cover

While the least effective, a liquid solar cover is by far the easiest to use and least expensive option. A liquid solar cover is a product that you add weekly. It is lighter than water so that it forms a thin film on the surface of the pool thereby cutting down on evaporation. If you use one, it is recommended that you leave the pump off on cool nights so as to not disturb the surface tension and maximize the sealing effect.

Would a heat pump work for my pool?

 Summary

While heat pumps are "efficient" they are not practical for the dry and sunny climate of the Inland Empire of Southern California. Solar pool heating is a better option for our area. (If we lived in Florida or on the coast, by recommendation would change.)  

Let’s look at some examples:

Case 1: A small add-on heat pump

Let’s say we want to add a heat pump to an existing equipment pad and we already have a standard electrical supply and subpanel that was originally sized to be used for pumps, blowers, lights, and a gas heater. This means we can likely only add a small heat pump that can be put on a 20-amp breaker.

RayPak makes a CrossWind 500-I that will use a 20-amp breaker and draws 16 amps and uses 1,280 watts of power. (This is similar to what an old single speed 1.5 hp pool pump would use.)

Now, let’s look at what we can expect from it. At 80-degrees with 80 percent humidity and trying to heat the pool to 80 degrees (this is known in the industry as 80, 80, 80,) this heat pump would have an output of 44,750 BTUs. Compare that to a typical residential gas heater that is rated at somewhere between 260,000 and 400,000 BTUs. It is not uncommon for a typical gas heater to heat a pool at a rate of about a degree an hour. With this heat pump we would expect about a tenth of a degree per hour. From this calculation we see that this heat pump wouldn’t heat the pool so much as maintain the heat in the pool.

Now, the above example was a best-case scenario for the heat pump (80, 80, 80 – see previous paragraph). While you might get 80% humidity in Florida, in California it is more likely to get 63% humidity. At this lower humidity, that same heat pump that we looked at in the above example goes from producing 44,750 BTUs down to 42,500 BTUs, at the same 80-degree temperature. But what if you try to heat at night when the temperature drops to 50 degrees? Then, the output of that same heat pump drops to less than half of its ideal and only delivers 21,000 BTUs. (It should also be noted that heat pumps do not work below 48 degrees and most have a built it cut off at 50 degrees.) 

But here is the further downside – that heat pump still consumes 1,280 watts regardless of whether it is supplying 44k BTUs into your pool or only 21k BTUs. Unlike gas, you pay for the time that the compressor is running, not the heat that is delivered.   

 

Case 2: A large heat pump

Having seen that the small heat pump does not have the capacity to heat an average pool / spa combo like a gas heater did, perhaps we want to look at a larger heat pump. The largest heat pump that RayPak makes is the TWPH-8550EHT08.

If we want to install this one, we will need a 60 to 70-amp breaker. But the breaker is only the beginning, we also need larger wires run from the main breaker panel to the pool subpanel. We would likely need 4 AWG wires. This is larger than the wiring run to most pool subpanels so we would need an electrician to upgrade the conduit and wires between the house and the pool panel and likely upgrade both of those panels as well.

When running, this large heat pump would consume 6,600 watts of power. (Contrast this to a modern variable speed pool pump that typically only consumes between 100 and 600 watts.) The only power use comparable to this is the power used by a portable spa when it is heating. Portable spas typically have a 6kw heater. When the heater and pump are both running together they use about as much power as this heat pump. So it sounds like you can heat a pool for the same cost as heating a spa? No. With the spa, you heat it once for about 8 hours and it stays warm due to being insulated. Using a heat pump to heat a pool requires that you use that much power eight hours a day for every day that you are heating. 

Let's do some cost calculations: 6.600 kwh * 8 hours a day * 30 days a month * $0.38/kwh = $601.92 per month to maintain the heat in your pool with a large heat pump. (Contrast that to heating your portable spa: 6.600 kwh 8 * hours * $0.38 = $20.06.)  

Aren't heat pumps supposed to be more efficient? Yes they are. Let's compare this large heat pump to the 6kw heating element in a portable spa. The element in the spa is 100% efficient. It uses 6kw of power to produce 19k BTUs. So what can we expect from the heat pump at the same power usage. It depends on the following factors. 

At peak efficiency of 80-degree air temperature, 80 percent humidity, and 80-degree pool temperature, this heat pump would produce 138k BTUs (while this is much more than the 19k BTU heating element in a portable spa, it is small compared to a gas pool heater which is typically 260k to 400k BTUs). Thus, we see that the largest heat pump is half the output of a small gas heater at optimum conditions.  But, if we look at more realistic conditions for Southern California (80-degree air temperature, 63 percent humidity, and 80-degree water temperature) we see that the output drops down to 130k BTUs and at night when the temperature drops to 50-degrees, then the output would only be 87k BTUs. But remember, the heat pump still consumes the same 6,600 watts of power regardless of whether it is giving out 130k BTUs during the day or only 87k BTUs at night.

If 6kw electric heater is 100% efficient (and it nearly is) and since it produces 19k BTU of heat, when you compare it to a heat pump that can produce between 87k and 138k BTUs of heat for the same power consumption, it looks like a heat pump is much more efficient and thus appealing. However, there is an even better option: 

Since the Inland Empire of Southern California has a lot of sunny days and low humidity, a better alternative is to use solar for heating. Solar pool heaters simply route pool water up onto your roof and pass the water through black (heat absorbing) solar panels that absorb free heat from the sun. This is much more economical than a heat pump as no extra electricity is required for heating (the pump may need to run at a higher RPM, but the same would be true if using a heat pump.) Since you are not paying for the heat (as it comes from the sun) solar is much more economical than the heat pump. So why are heat pumps popular in other locations? Florida has high humidity so a heat pump there will be more efficient than the same one in the drier climate of Southern California. Closer to the coast, there is more cloud cover, so a heat pump has an advantage over solar, but here in the Inland Empire we have low humidity and mostly sunny days making solar pool heating more ideal than a heat pump.

Case 3: So maybe a heat pump isn’t best for heating the pool, but what about just the spa?

You notice that the above calculations all assume that we want 80-degree water. That is because the heat pump is most efficient at generating 80-degree water. But, just as the efficiency dropped when the humidity dropped to 60 percent and when the air temperature dropped to 50 degrees, so too does efficiency drop when trying to heat the water over 80 degrees. Thus, for every degree over 80, it will take more time to heat than the previous degree.

Thus, because we want a spa to be 101–104 degrees, heat pumps are not very good at achieving the higher temperature desired in a spas.

Case 4: So maybe an electric heater for the spa?

If you have a self-contained, insulated, and covered spa, an electric heater is a great option. If you have typical pool and spa combo and only want to heat the spa up for occasional use, electric heat is still not a good option as these heaters are simply too small to be practical. Raypak makes an E3T-27 electric heater. It is rated at 92k BTUs. So again, this electric heater is significantly lower output compared to a small gas heater that is typically 260k BTUs (and much less than a 400k BTU pool heater).

As for power requirements, this heater alone calls for three 40-amp 220v breakers. That is more capacity than most pool subpanels (and more than the wiring going to them can accommodate) so you will have to have an electrician upgrade your conduit, wires, and likely both panels as well.

As for heat up time, if it typically took 30 minutes to an hour to heat your spa, plan on several hours.

A better way requires different designs

So, how are homeowners who live in new developments that are not installing gas lines going to heat pools and spas without gas? Pools and spas will have to be designed differently.  

Heating the pool can be accomplished with either solar panels or a heat pump. Neither are good at heating quickly, but both do a decent job maintaining temperature throughout the season—but neither are ideal for year-round use.

The key to making them work is to minimize heat loss by keeping the pool covered. Approximately 80 percent of heat is lost through evaporation. Thus, to minimize the cost of using a heat pump, the pool should be covered at night when the temperature drops.

The typical Southern California pool is a free form shape and often has raised walls on some sides and typically has a spa that spills over into the pool. This design does not work well with automatic covers. Automatic covers work best on simple rectangles.

Many pools also have negative edges where the water flows over a vanishing edge into a catch basin. This design is not practical for use with any heater because the water going over the edge loses heat to the air.  If you want to heat such a pool, turn the edge pump off when heating and then realize that the pool will cool as soon as you resume using the edge pump.

The most efficient way to keep a pool warm is to design it as a rectangle, install an auto cover, and keep it regularly closed at night.

Additionally, water features like vanishing edges, spa spillovers, sheer descents, and waterfalls are all sources of heat loss. These should be minimized, or they should be separate bodies of water from the heated pool.  

Spas need to change too.

Or, rather, Southern Californians need to get away from the idea that a pool and spa combo is ideal and, instead, use detached self-contained and covered spas. These spas will typically need a 50-amp, 220v power supply and have a 6 kw heater that takes around 8 hours to heat. This heater draws about the same amount of power as does the large heat pump in the above case #2, but whereas the heat pump runs all day every day to maintain the temperature of the pool, the cost to run the heater in a self-contained spa is really only noticeable during the initial heat up cycle (about $20). Thereafter, since the spa is insulated, you rarely notice a difference in your electrical bill.

But rather than heating them before every use, as is typical with a gas heater, people that have these type of “portable spas” leave them hot, covered, and ready to use all the time. The insulation around the shell and in the cover makes this quite economical and very convenient.  

The biggest change will be aesthetics. Here in Southern California, we are accustomed to looking out the back door and seeing pools and spas with sparkling flowing water. The more typical view in these communities will be the sight of closed covers.  

Basic Spa Care

This advice is  intended for personal backyard spas that are only used by a couple of people and stay covered all the time. 

Get a test kit that can measure Bromine, pH, and Alkalinity. I prefer the ones that use drops, but you can also use strips. (I just have trouble discerning the colors on the strips and can see the color change with the drops better.) Test about once a week. 

If the pH or Alkalinity is low -- add Baking Soda (a couple of tablespoons at a time)
If the pH or Alkalinity is high -- add acid (dry acid is safer for spas) (a couple of tablespoons at a time) 

For sanitizing, I recommend using 1" bromine tablets in a floater. (If your skimmer has a dedicated place for tablets, you can put them there.) Two or three at a time should be fine. They stay in all the time and provide slow and constant sanitizer.

Every couple of weeks you can add an oxidizer shock. Use potassium monopersulfate (maybe 2-3 Tbs at a time). Do not use chlorine shock. 
On alternate weeks from the oxidizer I recommend using an enzyme called Spa Perfect. It gets rid of odors and body oils.

There will be many weeks that you won't need to do anything except maybe add another bromine tablet.

The spa needs to filter every day, but doesn't need much time--maybe an hour. 

Taking care of a spa is pretty easy. Less is better. You can run the sanitizer on the low end of ideal since the spa has few people using it. 

Algaecides and Mustard Algae

 Chlorine will kill most algae, but has a hard time killing mustard algae. Mustard algae is a yellow algae that will grow on the sides of a pool. It generally brushes off easily, but if you don't kill it, it will come back. 

In addition to showing up in the pool, it will also coat the grid inside the filter and cause the filter pressure to build up quickly (sometimes within a day after cleaning). 

The only way to deal with mustard algae is to kill it with one of the following types of algaecide:

• Copper based algaecide -- this is my first weapon of choice for mustard algae. You can buy it as a liquid or in a more easy to use canister form (Pool Rx). 
• Silver algaecide -- this is another good tool for killing mustard algae.
• Sodium Bromide -- this also works to kill black algae by turning free chlorine into chloramines. While this is not normally a good idea, it works for mustard algae.

Each of these is further explained in other posts on this same blog. Look there for further information and be sure to follow package labels for dosing amounts. 

With all of these, brushing is essential. As long as the algae is on the side of the pool, it is somewhat protected from the chemicals in the water. Brush daily to put the algae in the water so that the chlorine and algaecide can kill it.

Finally, if you have mustard algae, you will need to clean your filter often until you kill the algae--and then once after you do kill the algae to remove the dead algae from the filter. As long as there is algae in the pool, your filter pressure will go up and your circulation will be poor. Kill it first, then filter out the dead algae.   

P.S. If treating mustard algae don't bother using an Algae Preventative (it is much too late to use a preventative once you already have it). Also polymer algaecides like algaecide 60, while good for green algae are not going to work for mustard algae. 

Sodium Bromide

Sodium Bromide works similar to an algaecide, but what it is really doing in the water is combining with free chlorine to produce chloramines. Now, normally, you don't want chloramines in your water. Also known as combined chlorine, chloramines are largely responsible for the objectionable odor of chlorine. Additionally, they are not as good at killing bacteria as chlorine is. However, chloramines are better suited to kill mustard algae than is free chlorine. 

To use sodium bromide, add an initial dose according to label instructions. At the same time, add extra chlorine. A good rule of thumb is that whenever you add  sodium bromide, add a gallon of chlorine at the same time. You need the extra chlorine so that the sodium bromide can use it to form chloramines. Continue adding a smaller maintenance dose for about a month following the initial treatment to ensure that the algae does not return. 

While sodium bromide is effective, try not to use more than recommended on the label and try not to use it for more than a month. Using too much sodium bromide will eventually make it hard for the pool to hold chlorine. 

Sodium bromide is generally packaged as Yellow Out or Yellow Treat or something like that. 

Phosphates

 Phosphates are food for algae--and any other plants

Most phosphate removers are liquids that are added to the pool water. They bind with the phosphates and the resultant slime is collected in the filter. This phosphate slime is a slimy silvery coating that causes filter pressure to climb and circulation to rapidly diminish. If using one of these types of phosphate removers, plan on cleaning your filter a couple of times shortly after adding it. 

A major pool retailer pushes a "Perfect weekly treatment" product that contains a phosphate remover. When a pool owner uses this, I am often called out to troubleshoot a poor circulation issue only to discover that this product is being used. These pool owners will often be quite adamant that  the circulation problem can't be a clogged filter because they just cleaned it. And yet, when I take apart the filter I find the tell-tale silver slime coating their grids. Once they stop using the Perfect product, their circulation problem goes away.    

There is a better way to deal with phosphates

It is called PhosLocker. It comes in a pouch that you place in your skimmer. As pool water washes over this pouch, the granules inside the pouch absorb the phosphates. You leave the pouch in the skimmer for a month to collect the phosphates. Then, and this is the cool part, you take the pouch out, cut it open and spread in your garden where the trapped phosphates fertilize your plants. After all, phosphates are plant food. So stop feeding your algae and use them to feed your plants. 

Here is a link where you can order PhosLocker. 

Using Alum as a flocculant

 When a pool is really green and has so much algae that you can't even see the bottom, it is either time to drain and refill the entire pool or floc the pool and vacuum to waste. A flocculant drops everything to the bottom of the pool so that it can be vacuumed to waste. 

One of the best flocculants is Alum (i.e. Aluminum Sulfate). Alum is Al₂(SO₄)₃

Here is the reaction when added to water: 

Al₂(SO₄)₃ + 6H₂O ® 2Al³⁺ 3SO₄^2- + 6H⁺ + 6OH^- ® 2Al(OH)₃ + 3H₂SO₄

The resulting product is Al(OH)₃  which is an insoluble floc that will drop everything to the bottom of the pool where it can be vacuumed to waste. This including a good portion of cyanuric acid (stabilizer), carbonate alkalinity, and calcium hardness. (Adjust as needed after vacuuming and refilling.) 

Besides the floc, the remaining by-product is 3H₂SO₄ (Sulfuric acid) meaning that adding Alum will lower the pH. You can deal with this in one of two ways. You can raise the pH to a higher than normal level prior to adding Alum so that the pH doesn’t drop too low after adding it, however, the Alum will work better if you add the Alum when the pH is normal (near 7.2) and then raise back as needed after it drops. 

Temperature is also important as the water needs to be 70 degrees Fahrenheit or higher for a good chemical reaction to take place. 

Dosage isn't precise: dissolve and broadcast 2-6 lbs alum per 10k gallons.

Where to find it. Alum can be purchased from pool stores, but you will find better prices on larger quantities at garden centers as alum is also used in flower gardens.  

Silver Algaecide

 Silver algaecide has an oligodynamic effect on algae. It initially creates pores in the cell's membrane and then damages DND and m-RNA. It denatures its ribosomes, alters its energy drive, and damages the mitochondria causing cellular dismantling and oxidizing vital proteins. "Silver is badass; they use this stuff to kill werewolves." -- From "Mastering the Art of Green-to-Clean," by Rudy Stankowitz in Aqua, August 2023, p, 31. 

Copper Algaecides

It turns out that copper is vital to the survival of algae and photosynthetic bacteria (better known as black algae). So why do algaecides contain copper? 

A little is vital, too much is deadly. It is a bit of a Trojan Horse effect. The algae will readily take in copper, but if it takes in too much then the copper will interfere with the Calvin cycle (i.e. the photosynthesis process whereby carbon dioxide is converted to sugar.)  

First time iAqualink set up

 If I just installed an iAqualink wifi antenna for you, this is what you need to do to start using your phone to control your pool.

1. Make sure your phone is connected to the same wifi network that the iAqualink antenna is. 
• (This is for security purposes for the initial setup. Once you have added your system, you can control it from anywhere you have internet access.)
2. 
   Install the iAqualink app by Zodiac Pool Systems. 
   
• (Found on the Apple App Store or Google Play Store.)
3. Sign up for a new account. 
• Make sure your password meets the listed criteria.
4. Add your system. 
• Hit the plus sign in the top right corner. 
• Select the first line "AquaLink RS, PDA, Z4/TRi).
5. Enter your device number. 
• It is the 12 digit code printed on the back of the door hanger. It is also on a sticker on the bottom side of the iAqualink antenna. 
6. Give your system a name. 
• If you have only one system the name doesn't matter. It can be your last name, My Backyard Paradise, or anything you want. You will select this every time you log in. If you have two or more systems like for rental properties or vacation homes, then naming them becomes important. 
7. Wait for it to connect.
8. Using your system:
• Each time after logging in, select your system. This will take you to the home screen.
• The Home Screen lets you turn on the pool, the spa, the heater, and set the temperatures. It also displays the current temperature of whatever is on. 
• The Equipment Screen is where you turn on features like lights, waterfalls, etc.
• You can set up one-touch scenes if you like. These are macros so that one touch does several things at once. 
• The Web button allows access to a more complete, but slower, version of the control system. This is where you edit schedules and set up the system. 
9. Other people in  your household can also have their own account. Simply have them repeat all of the above steps. Alternatively, they can install the app and sign on with your user name and password.     

Two or more people using the same iAqualink

 How can multiple people control the same system using iAqualink?

Method 1: Have them sign in with the same credentials that you use. They would put in your email and your password. 

This should work. If it doesn't, I suspect that you need to update your own password. Older versions of the app allowed for weak passwords. Newer versions require stronger passwords. Perhaps you still have an old version of the app and the person installing it now is downloading the most recent version. To update your password use the forgot password feature. You will get a link in your email to reset it.

Method 2: Have them set up their own account:

1. First they need to make sure that their phone is connected to the same 2.4 GHz wifi network as your iAqualink antenna is. This is a security feature and it only applies during this sign up process. 
2. Download and install the Zodiac iAqualink app from the Apple App Store or the Google Play Store.
3. Make sure that the outdoor controller is in "Auto" mode. If it is in "Service" or "Time Out" you will not be able to connect.  
4. Inside the app, select "Sign Up" and fill out the form.
5. On the app select "My Systems" (you may need to access this from the "hamburger" dropdown menu on the top left. 
6. Once in "My Systems" select the + sign on the top right.
7. Select the first line, "Aqualink RS, PDA, Z4/TRi"
8. On the next page enter the device number that is printed on the label that is on the outside of the iAqualink antenna.
9. Make up a System Name. This can be your last name or anything that you call your backyard pool. The only times it matters what you call it is if you have two different systems or two pools (for instance, you have one pool at your primary residence and another pool at a vacation home.) 
10. Select the "Add System" button and it should connect.

If it doesn't connect confirm that  you are on the same 2.4 GHz wifi network. The antenna may be connecting via a wifi extender or a guest network. For this sign up procedure to work, you must be on the same one during the add system part of the procedure.   

If that doesn't work, confirm that all three lights on the bottom of the iAqualink antenna are lit. 

An open letter to the managers of the SoCalGas Marketplace,

I am the owner of Technical Pool Repair. I have been servicing and installing gas pool heaters in the SoCalGas territory since 1998. 

A pool heater is not simply an appliance that you plug in. It must be installed. But before that, it must be sized correctly to ensure that it receives enough gas for complete combustion and that it is installed on a system whose water flow is a good match for the flow requirements of the heater. For these reasons it is important that heaters be replaced under the guidance of properly trained contractors. It is irresponsible of the SoCalGas Marketplace to encourage home owners to purchase heaters online based on a few choices listed on your site. Home owners do not know about gas requirements or water flow. They almost invariably choose a heater that is less than ideal for their situation. If an oversized heater is installed where there is inadequate gas supply, it will result it incomplete combustion which means excessive pollution. It also means that this pollution -- this soot -- will soon be obstruct air flow through the heat exchanger. The heater will destroy itself in only a couple of years. This is why it is irresponsible to have the SoCalGas Marketplace set up as you currently do. 

The responsible way for SoCalGas to set up such a program would be to funnel interested pool owners to qualified contractors and then work together with those contractors. 

Additionally, the heaters listed on the SoCalGas Marketplace are not the most efficient nor the most current models. This is in part because the manufacturers have realized all of what I said about about sizing and professional consultations and have decided not to sell their any of their products or at least not the newest and most efficient models online. Manufactures in the last few years have realized the essential role that contractors play. Moreover, they realize that this role must begin with an initial consultation in which recommendations are made. A pool heater installer is not just someone who shows up to install whatever is purchased. A pool heater contractor must be involved in the selection as well as the installation. Not all heaters will work on all sites.   

Sincerely, 

Clint Combs 

Technical Pool Repair

iAqualink with new router

 So you installed a new router and now your iAqualink does not connect? Here is what you need to do:

1. Make sure your phone is signed on to a 2.4 gHz router connection. Some routers are too "helpful" and will try to offer a 5 gHz connection. A 5 gHz connection is faster, but has shorter range. The iAqualink only works on 2.4 gHz. Sometimes it helps to set up a guest network on your router and limit it to 2.4 gHz.
2. Go out to the iAqualink antenna and remove the cover (two Philips head screws) 
3. Slide the switch from "wifi" to "wired" and back to "wifi." This erases your old router settings.
4. Teach the antenna your new settings by going to the wifi settings on your phone. You will see one that says iAqualink. Sign on to that. A popup will show up with a list of wifi signals to choose from. Select yours -- remember this needs to be a 2.4 gHz signal and must be the one that your phone is already signed into.
5. Put the cover back on and wait a few minutes for it to connect. 
   

Earth Day

 Looking to help your pool celebrate Earth Day? 

• Save resources (and energy costs) when you invest in a quiet, energy-efficient variable-speed pump. 
• Use less natural gas to heat your pool when you have us install a new 84% efficient Jandy Jxi pool heater (and get a $400 rebate from The Gas Company) see website for details.
• Instead of turning on your old 500 watt pool light, have us install a brilliant 37 watt color changing LED light that turns your poolside into a party spot.  

 Go Green Financing

Step by step guide

• Step One - Customer Credit Approval: Customer submits a financing application to one of the program's lending partners. Note: Be sure to have the customer sign the Borrower Consent Form so the lender can inform you when credit approval occurs.
• Step Two - Project Approval: Submit your proposed Itemized Invoice of eligible measure(s) along with any other related home improvements directly to the lender. (Resource: How to Properly Fill Out an Itemized Invoice).
• Step Three - Project Completion: Once the lender has approved your project, complete the installation and submit a final invoice and the Certificate of Completion to the lender. Finalize all permits and complete the combustion appliance safety test if needed.
• Step Four - Project Funding: The lender remits funding within 24 hours of the loan closing via check.

New Department of Energy Standards

As of July 18, 2021 new U.S. Department of Energy regulations are now in effect. These new regulations mean that most new pool pumps will now have to be variable-speed energy-efficient pumps.  

While you can still use whatever pump you currently have, any new pump or motor that is manufactured will now have to comply with these new energy efficient regulations. 

This standard applies to almost all pumps used in the residential pool industry.  

This supersedes state regulations, such as California’s Title 20, which took the lead in setting efficiency standards for pumps when it passed in 2005. Additionally, while Title 20 applied only to filtration pumps and only to residential pools, the Department of Energy regulations applies to all pool pumps residential and commercial including dedicated use pumps like booster pumps and water feature pumps.